Revonzy Mini Shell
/*
* VFIO API definition
*
* Copyright (C) 2012 Red Hat, Inc. All rights reserved.
* Author: Alex Williamson <alex.williamson@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef VFIO_H
#define VFIO_H
#include <linux/types.h>
#include <linux/ioctl.h>
#define VFIO_API_VERSION 0
/* Kernel & User level defines for VFIO IOCTLs. */
/* Extensions */
#define VFIO_TYPE1_IOMMU 1
#define VFIO_SPAPR_TCE_IOMMU 2
#define VFIO_TYPE1v2_IOMMU 3
/*
* IOMMU enforces DMA cache coherence (ex. PCIe NoSnoop stripping). This
* capability is subject to change as groups are added or removed.
*/
#define VFIO_DMA_CC_IOMMU 4
/* Check if EEH is supported */
#define VFIO_EEH 5
#define VFIO_SPAPR_TCE_v2_IOMMU 7
/*
* The No-IOMMU IOMMU offers no translation or isolation for devices and
* supports no ioctls outside of VFIO_CHECK_EXTENSION. Use of VFIO's No-IOMMU
* code will taint the host kernel and should be used with extreme caution.
*/
#define VFIO_NOIOMMU_IOMMU 8
/*
* The IOCTL interface is designed for extensibility by embedding the
* structure length (argsz) and flags into structures passed between
* kernel and userspace. We therefore use the _IO() macro for these
* defines to avoid implicitly embedding a size into the ioctl request.
* As structure fields are added, argsz will increase to match and flag
* bits will be defined to indicate additional fields with valid data.
* It's *always* the caller's responsibility to indicate the size of
* the structure passed by setting argsz appropriately.
*/
#define VFIO_TYPE (';')
#define VFIO_BASE 100
/*
* For extension of INFO ioctls, VFIO makes use of a capability chain
* designed after PCI/e capabilities. A flag bit indicates whether
* this capability chain is supported and a field defined in the fixed
* structure defines the offset of the first capability in the chain.
* This field is only valid when the corresponding bit in the flags
* bitmap is set. This offset field is relative to the start of the
* INFO buffer, as is the next field within each capability header.
* The id within the header is a shared address space per INFO ioctl,
* while the version field is specific to the capability id. The
* contents following the header are specific to the capability id.
*/
struct vfio_info_cap_header {
__u16 id; /* Identifies capability */
__u16 version; /* Version specific to the capability ID */
__u32 next; /* Offset of next capability */
};
/*
* Callers of INFO ioctls passing insufficiently sized buffers will see
* the capability chain flag bit set, a zero value for the first capability
* offset (if available within the provided argsz), and argsz will be
* updated to report the necessary buffer size. For compatibility, the
* INFO ioctl will not report error in this case, but the capability chain
* will not be available.
*/
/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */
/**
* VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0)
*
* Report the version of the VFIO API. This allows us to bump the entire
* API version should we later need to add or change features in incompatible
* ways.
* Return: VFIO_API_VERSION
* Availability: Always
*/
#define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0)
/**
* VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32)
*
* Check whether an extension is supported.
* Return: 0 if not supported, 1 (or some other positive integer) if supported.
* Availability: Always
*/
#define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1)
/**
* VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32)
*
* Set the iommu to the given type. The type must be supported by an
* iommu driver as verified by calling CHECK_EXTENSION using the same
* type. A group must be set to this file descriptor before this
* ioctl is available. The IOMMU interfaces enabled by this call are
* specific to the value set.
* Return: 0 on success, -errno on failure
* Availability: When VFIO group attached
*/
#define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2)
/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */
/**
* VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3,
* struct vfio_group_status)
*
* Retrieve information about the group. Fills in provided
* struct vfio_group_info. Caller sets argsz.
* Return: 0 on succes, -errno on failure.
* Availability: Always
*/
struct vfio_group_status {
__u32 argsz;
__u32 flags;
#define VFIO_GROUP_FLAGS_VIABLE (1 << 0)
#define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1)
};
#define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3)
/**
* VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32)
*
* Set the container for the VFIO group to the open VFIO file
* descriptor provided. Groups may only belong to a single
* container. Containers may, at their discretion, support multiple
* groups. Only when a container is set are all of the interfaces
* of the VFIO file descriptor and the VFIO group file descriptor
* available to the user.
* Return: 0 on success, -errno on failure.
* Availability: Always
*/
#define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4)
/**
* VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5)
*
* Remove the group from the attached container. This is the
* opposite of the SET_CONTAINER call and returns the group to
* an initial state. All device file descriptors must be released
* prior to calling this interface. When removing the last group
* from a container, the IOMMU will be disabled and all state lost,
* effectively also returning the VFIO file descriptor to an initial
* state.
* Return: 0 on success, -errno on failure.
* Availability: When attached to container
*/
#define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5)
/**
* VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char)
*
* Return a new file descriptor for the device object described by
* the provided string. The string should match a device listed in
* the devices subdirectory of the IOMMU group sysfs entry. The
* group containing the device must already be added to this context.
* Return: new file descriptor on success, -errno on failure.
* Availability: When attached to container
*/
#define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6)
/* --------------- IOCTLs for DEVICE file descriptors --------------- */
/**
* VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7,
* struct vfio_device_info)
*
* Retrieve information about the device. Fills in provided
* struct vfio_device_info. Caller sets argsz.
* Return: 0 on success, -errno on failure.
*/
struct vfio_device_info {
__u32 argsz;
__u32 flags;
#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */
#define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */
__u32 num_regions; /* Max region index + 1 */
__u32 num_irqs; /* Max IRQ index + 1 */
};
#define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7)
/*
* Vendor driver using Mediated device framework should provide device_api
* attribute in supported type attribute groups. Device API string should be one
* of the following corresponding to device flags in vfio_device_info structure.
*/
#define VFIO_DEVICE_API_PCI_STRING "vfio-pci"
#define VFIO_DEVICE_API_PLATFORM_STRING "vfio-platform"
#define VFIO_DEVICE_API_AMBA_STRING "vfio-amba"
/**
* VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
* struct vfio_region_info)
*
* Retrieve information about a device region. Caller provides
* struct vfio_region_info with index value set. Caller sets argsz.
* Implementation of region mapping is bus driver specific. This is
* intended to describe MMIO, I/O port, as well as bus specific
* regions (ex. PCI config space). Zero sized regions may be used
* to describe unimplemented regions (ex. unimplemented PCI BARs).
* Return: 0 on success, -errno on failure.
*/
struct vfio_region_info {
__u32 argsz;
__u32 flags;
#define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */
#define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */
#define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */
#define VFIO_REGION_INFO_FLAG_CAPS (1 << 3) /* Info supports caps */
__u32 index; /* Region index */
__u32 cap_offset; /* Offset within info struct of first cap */
__u64 size; /* Region size (bytes) */
__u64 offset; /* Region offset from start of device fd */
};
#define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8)
/*
* The sparse mmap capability allows finer granularity of specifying areas
* within a region with mmap support. When specified, the user should only
* mmap the offset ranges specified by the areas array. mmaps outside of the
* areas specified may fail (such as the range covering a PCI MSI-X table) or
* may result in improper device behavior.
*
* The structures below define version 1 of this capability.
*/
#define VFIO_REGION_INFO_CAP_SPARSE_MMAP 1
struct vfio_region_sparse_mmap_area {
__u64 offset; /* Offset of mmap'able area within region */
__u64 size; /* Size of mmap'able area */
};
struct vfio_region_info_cap_sparse_mmap {
struct vfio_info_cap_header header;
__u32 nr_areas;
__u32 reserved;
struct vfio_region_sparse_mmap_area areas[];
};
/*
* The device specific type capability allows regions unique to a specific
* device or class of devices to be exposed. This helps solve the problem for
* vfio bus drivers of defining which region indexes correspond to which region
* on the device, without needing to resort to static indexes, as done by
* vfio-pci. For instance, if we were to go back in time, we might remove
* VFIO_PCI_VGA_REGION_INDEX and let vfio-pci simply define that all indexes
* greater than or equal to VFIO_PCI_NUM_REGIONS are device specific and we'd
* make a "VGA" device specific type to describe the VGA access space. This
* means that non-VGA devices wouldn't need to waste this index, and thus the
* address space associated with it due to implementation of device file
* descriptor offsets in vfio-pci.
*
* The current implementation is now part of the user ABI, so we can't use this
* for VGA, but there are other upcoming use cases, such as opregions for Intel
* IGD devices and framebuffers for vGPU devices. We missed VGA, but we'll
* use this for future additions.
*
* The structure below defines version 1 of this capability.
*/
#define VFIO_REGION_INFO_CAP_TYPE 2
struct vfio_region_info_cap_type {
struct vfio_info_cap_header header;
__u32 type; /* global per bus driver */
__u32 subtype; /* type specific */
};
#define VFIO_REGION_TYPE_PCI_VENDOR_TYPE (1 << 31)
#define VFIO_REGION_TYPE_PCI_VENDOR_MASK (0xffff)
#define VFIO_REGION_SUBTYPE_INTEL_IGD_OPREGION (1)
/**
* VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
* struct vfio_irq_info)
*
* Retrieve information about a device IRQ. Caller provides
* struct vfio_irq_info with index value set. Caller sets argsz.
* Implementation of IRQ mapping is bus driver specific. Indexes
* using multiple IRQs are primarily intended to support MSI-like
* interrupt blocks. Zero count irq blocks may be used to describe
* unimplemented interrupt types.
*
* The EVENTFD flag indicates the interrupt index supports eventfd based
* signaling.
*
* The MASKABLE flags indicates the index supports MASK and UNMASK
* actions described below.
*
* AUTOMASKED indicates that after signaling, the interrupt line is
* automatically masked by VFIO and the user needs to unmask the line
* to receive new interrupts. This is primarily intended to distinguish
* level triggered interrupts.
*
* The NORESIZE flag indicates that the interrupt lines within the index
* are setup as a set and new subindexes cannot be enabled without first
* disabling the entire index. This is used for interrupts like PCI MSI
* and MSI-X where the driver may only use a subset of the available
* indexes, but VFIO needs to enable a specific number of vectors
* upfront. In the case of MSI-X, where the user can enable MSI-X and
* then add and unmask vectors, it's up to userspace to make the decision
* whether to allocate the maximum supported number of vectors or tear
* down setup and incrementally increase the vectors as each is enabled.
*/
struct vfio_irq_info {
__u32 argsz;
__u32 flags;
#define VFIO_IRQ_INFO_EVENTFD (1 << 0)
#define VFIO_IRQ_INFO_MASKABLE (1 << 1)
#define VFIO_IRQ_INFO_AUTOMASKED (1 << 2)
#define VFIO_IRQ_INFO_NORESIZE (1 << 3)
__u32 index; /* IRQ index */
__u32 count; /* Number of IRQs within this index */
};
#define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9)
/**
* VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set)
*
* Set signaling, masking, and unmasking of interrupts. Caller provides
* struct vfio_irq_set with all fields set. 'start' and 'count' indicate
* the range of subindexes being specified.
*
* The DATA flags specify the type of data provided. If DATA_NONE, the
* operation performs the specified action immediately on the specified
* interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]:
* flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1.
*
* DATA_BOOL allows sparse support for the same on arrays of interrupts.
* For example, to mask interrupts [0,1] and [0,3] (but not [0,2]):
* flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3,
* data = {1,0,1}
*
* DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd.
* A value of -1 can be used to either de-assign interrupts if already
* assigned or skip un-assigned interrupts. For example, to set an eventfd
* to be trigger for interrupts [0,0] and [0,2]:
* flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3,
* data = {fd1, -1, fd2}
* If index [0,1] is previously set, two count = 1 ioctls calls would be
* required to set [0,0] and [0,2] without changing [0,1].
*
* Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used
* with ACTION_TRIGGER to perform kernel level interrupt loopback testing
* from userspace (ie. simulate hardware triggering).
*
* Setting of an event triggering mechanism to userspace for ACTION_TRIGGER
* enables the interrupt index for the device. Individual subindex interrupts
* can be disabled using the -1 value for DATA_EVENTFD or the index can be
* disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
*
* Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while
* ACTION_TRIGGER specifies kernel->user signaling.
*/
struct vfio_irq_set {
__u32 argsz;
__u32 flags;
#define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */
#define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */
#define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */
#define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */
#define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */
#define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */
__u32 index;
__u32 start;
__u32 count;
__u8 data[];
};
#define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10)
#define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \
VFIO_IRQ_SET_DATA_BOOL | \
VFIO_IRQ_SET_DATA_EVENTFD)
#define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \
VFIO_IRQ_SET_ACTION_UNMASK | \
VFIO_IRQ_SET_ACTION_TRIGGER)
/**
* VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11)
*
* Reset a device.
*/
#define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11)
/*
* The VFIO-PCI bus driver makes use of the following fixed region and
* IRQ index mapping. Unimplemented regions return a size of zero.
* Unimplemented IRQ types return a count of zero.
*/
enum {
VFIO_PCI_BAR0_REGION_INDEX,
VFIO_PCI_BAR1_REGION_INDEX,
VFIO_PCI_BAR2_REGION_INDEX,
VFIO_PCI_BAR3_REGION_INDEX,
VFIO_PCI_BAR4_REGION_INDEX,
VFIO_PCI_BAR5_REGION_INDEX,
VFIO_PCI_ROM_REGION_INDEX,
VFIO_PCI_CONFIG_REGION_INDEX,
/*
* Expose VGA regions defined for PCI base class 03, subclass 00.
* This includes I/O port ranges 0x3b0 to 0x3bb and 0x3c0 to 0x3df
* as well as the MMIO range 0xa0000 to 0xbffff. Each implemented
* range is found at it's identity mapped offset from the region
* offset, for example 0x3b0 is region_info.offset + 0x3b0. Areas
* between described ranges are unimplemented.
*/
VFIO_PCI_VGA_REGION_INDEX,
VFIO_PCI_NUM_REGIONS = 9 /* Fixed user ABI, region indexes >=9 use */
/* device specific cap to define content. */
};
enum {
VFIO_PCI_INTX_IRQ_INDEX,
VFIO_PCI_MSI_IRQ_INDEX,
VFIO_PCI_MSIX_IRQ_INDEX,
VFIO_PCI_ERR_IRQ_INDEX,
VFIO_PCI_REQ_IRQ_INDEX,
VFIO_PCI_NUM_IRQS
};
/**
* VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IORW(VFIO_TYPE, VFIO_BASE + 12,
* struct vfio_pci_hot_reset_info)
*
* Return: 0 on success, -errno on failure:
* -enospc = insufficient buffer, -enodev = unsupported for device.
*/
struct vfio_pci_dependent_device {
__u32 group_id;
__u16 segment;
__u8 bus;
__u8 devfn; /* Use PCI_SLOT/PCI_FUNC */
};
struct vfio_pci_hot_reset_info {
__u32 argsz;
__u32 flags;
__u32 count;
struct vfio_pci_dependent_device devices[];
};
#define VFIO_DEVICE_GET_PCI_HOT_RESET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
/**
* VFIO_DEVICE_PCI_HOT_RESET - _IOW(VFIO_TYPE, VFIO_BASE + 13,
* struct vfio_pci_hot_reset)
*
* Return: 0 on success, -errno on failure.
*/
struct vfio_pci_hot_reset {
__u32 argsz;
__u32 flags;
__u32 count;
__s32 group_fds[];
};
#define VFIO_DEVICE_PCI_HOT_RESET _IO(VFIO_TYPE, VFIO_BASE + 13)
/**
* VFIO_DEVICE_QUERY_GFX_PLANE - _IOW(VFIO_TYPE, VFIO_BASE + 14,
* struct vfio_device_query_gfx_plane)
*
* Set the drm_plane_type and flags, then retrieve the gfx plane info.
*
* flags supported:
* - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_DMABUF are set
* to ask if the mdev supports dma-buf. 0 on support, -EINVAL on no
* support for dma-buf.
* - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_REGION are set
* to ask if the mdev supports region. 0 on support, -EINVAL on no
* support for region.
* - VFIO_GFX_PLANE_TYPE_DMABUF or VFIO_GFX_PLANE_TYPE_REGION is set
* with each call to query the plane info.
* - Others are invalid and return -EINVAL.
*
* Note:
* 1. Plane could be disabled by guest. In that case, success will be
* returned with zero-initialized drm_format, size, width and height
* fields.
* 2. x_hot/y_hot is set to 0xFFFFFFFF if no hotspot information available
*
* Return: 0 on success, -errno on other failure.
*/
struct vfio_device_gfx_plane_info {
__u32 argsz;
__u32 flags;
#define VFIO_GFX_PLANE_TYPE_PROBE (1 << 0)
#define VFIO_GFX_PLANE_TYPE_DMABUF (1 << 1)
#define VFIO_GFX_PLANE_TYPE_REGION (1 << 2)
/* in */
__u32 drm_plane_type; /* type of plane: DRM_PLANE_TYPE_* */
/* out */
__u32 drm_format; /* drm format of plane */
__u64 drm_format_mod; /* tiled mode */
__u32 width; /* width of plane */
__u32 height; /* height of plane */
__u32 stride; /* stride of plane */
__u32 size; /* size of plane in bytes, align on page*/
__u32 x_pos; /* horizontal position of cursor plane */
__u32 y_pos; /* vertical position of cursor plane*/
__u32 x_hot; /* horizontal position of cursor hotspot */
__u32 y_hot; /* vertical position of cursor hotspot */
union {
__u32 region_index; /* region index */
__u32 dmabuf_id; /* dma-buf id */
};
};
#define VFIO_DEVICE_QUERY_GFX_PLANE _IO(VFIO_TYPE, VFIO_BASE + 14)
/**
* VFIO_DEVICE_GET_GFX_DMABUF - _IOW(VFIO_TYPE, VFIO_BASE + 15, __u32)
*
* Return a new dma-buf file descriptor for an exposed guest framebuffer
* described by the provided dmabuf_id. The dmabuf_id is returned from VFIO_
* DEVICE_QUERY_GFX_PLANE as a token of the exposed guest framebuffer.
*/
#define VFIO_DEVICE_GET_GFX_DMABUF _IO(VFIO_TYPE, VFIO_BASE + 15)
/* -------- API for Type1 VFIO IOMMU -------- */
/**
* VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info)
*
* Retrieve information about the IOMMU object. Fills in provided
* struct vfio_iommu_info. Caller sets argsz.
*
* XXX Should we do these by CHECK_EXTENSION too?
*/
struct vfio_iommu_type1_info {
__u32 argsz;
__u32 flags;
#define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */
__u64 iova_pgsizes; /* Bitmap of supported page sizes */
};
#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
/**
* VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map)
*
* Map process virtual addresses to IO virtual addresses using the
* provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
*/
struct vfio_iommu_type1_dma_map {
__u32 argsz;
__u32 flags;
#define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */
#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */
__u64 vaddr; /* Process virtual address */
__u64 iova; /* IO virtual address */
__u64 size; /* Size of mapping (bytes) */
};
#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
/**
* VFIO_IOMMU_UNMAP_DMA - _IOWR(VFIO_TYPE, VFIO_BASE + 14,
* struct vfio_dma_unmap)
*
* Unmap IO virtual addresses using the provided struct vfio_dma_unmap.
* Caller sets argsz. The actual unmapped size is returned in the size
* field. No guarantee is made to the user that arbitrary unmaps of iova
* or size different from those used in the original mapping call will
* succeed.
*/
struct vfio_iommu_type1_dma_unmap {
__u32 argsz;
__u32 flags;
__u64 iova; /* IO virtual address */
__u64 size; /* Size of mapping (bytes) */
};
#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
/*
* IOCTLs to enable/disable IOMMU container usage.
* No parameters are supported.
*/
#define VFIO_IOMMU_ENABLE _IO(VFIO_TYPE, VFIO_BASE + 15)
#define VFIO_IOMMU_DISABLE _IO(VFIO_TYPE, VFIO_BASE + 16)
/* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */
/*
* The SPAPR TCE DDW info struct provides the information about
* the details of Dynamic DMA window capability.
*
* @pgsizes contains a page size bitmask, 4K/64K/16M are supported.
* @max_dynamic_windows_supported tells the maximum number of windows
* which the platform can create.
* @levels tells the maximum number of levels in multi-level IOMMU tables;
* this allows splitting a table into smaller chunks which reduces
* the amount of physically contiguous memory required for the table.
*/
struct vfio_iommu_spapr_tce_ddw_info {
__u64 pgsizes; /* Bitmap of supported page sizes */
__u32 max_dynamic_windows_supported;
__u32 levels;
};
/*
* The SPAPR TCE info struct provides the information about the PCI bus
* address ranges available for DMA, these values are programmed into
* the hardware so the guest has to know that information.
*
* The DMA 32 bit window start is an absolute PCI bus address.
* The IOVA address passed via map/unmap ioctls are absolute PCI bus
* addresses too so the window works as a filter rather than an offset
* for IOVA addresses.
*
* Flags supported:
* - VFIO_IOMMU_SPAPR_INFO_DDW: informs the userspace that dynamic DMA windows
* (DDW) support is present. @ddw is only supported when DDW is present.
*/
struct vfio_iommu_spapr_tce_info {
__u32 argsz;
__u32 flags;
#define VFIO_IOMMU_SPAPR_INFO_DDW (1 << 0) /* DDW supported */
__u32 dma32_window_start; /* 32 bit window start (bytes) */
__u32 dma32_window_size; /* 32 bit window size (bytes) */
struct vfio_iommu_spapr_tce_ddw_info ddw;
};
#define VFIO_IOMMU_SPAPR_TCE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
/*
* EEH PE operation struct provides ways to:
* - enable/disable EEH functionality;
* - unfreeze IO/DMA for frozen PE;
* - read PE state;
* - reset PE;
* - configure PE.
*/
struct vfio_eeh_pe_op {
__u32 argsz;
__u32 flags;
__u32 op;
};
#define VFIO_EEH_PE_DISABLE 0 /* Disable EEH functionality */
#define VFIO_EEH_PE_ENABLE 1 /* Enable EEH functionality */
#define VFIO_EEH_PE_UNFREEZE_IO 2 /* Enable IO for frozen PE */
#define VFIO_EEH_PE_UNFREEZE_DMA 3 /* Enable DMA for frozen PE */
#define VFIO_EEH_PE_GET_STATE 4 /* PE state retrieval */
#define VFIO_EEH_PE_STATE_NORMAL 0 /* PE in functional state */
#define VFIO_EEH_PE_STATE_RESET 1 /* PE reset in progress */
#define VFIO_EEH_PE_STATE_STOPPED 2 /* Stopped DMA and IO */
#define VFIO_EEH_PE_STATE_STOPPED_DMA 4 /* Stopped DMA only */
#define VFIO_EEH_PE_STATE_UNAVAIL 5 /* State unavailable */
#define VFIO_EEH_PE_RESET_DEACTIVATE 5 /* Deassert PE reset */
#define VFIO_EEH_PE_RESET_HOT 6 /* Assert hot reset */
#define VFIO_EEH_PE_RESET_FUNDAMENTAL 7 /* Assert fundamental reset */
#define VFIO_EEH_PE_CONFIGURE 8 /* PE configuration */
#define VFIO_EEH_PE_OP _IO(VFIO_TYPE, VFIO_BASE + 21)
/**
* VFIO_IOMMU_SPAPR_REGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 17, struct vfio_iommu_spapr_register_memory)
*
* Registers user space memory where DMA is allowed. It pins
* user pages and does the locked memory accounting so
* subsequent VFIO_IOMMU_MAP_DMA/VFIO_IOMMU_UNMAP_DMA calls
* get faster.
*/
struct vfio_iommu_spapr_register_memory {
__u32 argsz;
__u32 flags;
__u64 vaddr; /* Process virtual address */
__u64 size; /* Size of mapping (bytes) */
};
#define VFIO_IOMMU_SPAPR_REGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 17)
/**
* VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 18, struct vfio_iommu_spapr_register_memory)
*
* Unregisters user space memory registered with
* VFIO_IOMMU_SPAPR_REGISTER_MEMORY.
* Uses vfio_iommu_spapr_register_memory for parameters.
*/
#define VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 18)
/**
* VFIO_IOMMU_SPAPR_TCE_CREATE - _IOWR(VFIO_TYPE, VFIO_BASE + 19, struct vfio_iommu_spapr_tce_create)
*
* Creates an additional TCE table and programs it (sets a new DMA window)
* to every IOMMU group in the container. It receives page shift, window
* size and number of levels in the TCE table being created.
*
* It allocates and returns an offset on a PCI bus of the new DMA window.
*/
struct vfio_iommu_spapr_tce_create {
__u32 argsz;
__u32 flags;
/* in */
__u32 page_shift;
__u64 window_size;
__u32 levels;
/* out */
__u64 start_addr;
};
#define VFIO_IOMMU_SPAPR_TCE_CREATE _IO(VFIO_TYPE, VFIO_BASE + 19)
/**
* VFIO_IOMMU_SPAPR_TCE_REMOVE - _IOW(VFIO_TYPE, VFIO_BASE + 20, struct vfio_iommu_spapr_tce_remove)
*
* Unprograms a TCE table from all groups in the container and destroys it.
* It receives a PCI bus offset as a window id.
*/
struct vfio_iommu_spapr_tce_remove {
__u32 argsz;
__u32 flags;
/* in */
__u64 start_addr;
};
#define VFIO_IOMMU_SPAPR_TCE_REMOVE _IO(VFIO_TYPE, VFIO_BASE + 20)
/* ***************************************************************** */
#endif /* VFIO_H */
EliteHackz.ORG
Revonzy Mini Shell
root@revonzy.com